PINARELLO DOGMA F12 Series Assembly Manual page 47

12
. HEADSET ADJUSTING
12.7 Slide the handlebar down along the steerer tube till the top of the last spacer. Make
sure to slightly push all housings back into the frame to avoid kinks. Firmly tighten
the head set as usual, placing the expander and the top cover.
For the correct tightening torques refer to the chapter "3. TOOLS AND TORQUE SPECS".
The aspect of the rightly assembled headset should be like that showed below.
ATTENTION! The split spacers have larger dimensions than usual because of having
to fit with the 1" ½ upper bearing. So, they cannot be used on the upper side of the
handlebar. For the upper side, the standard aero spacers must be used (see also
paragraph 12.4).
47
CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. +39 0422 42 08 77 | fax +39 0422 42 18 16 | www.pinarello.com
44