Integrated Handlebar (Talon Ultra) Routing (Mechanical) - PINARELLO DOGMA F12 Series Assembly Manual

10
. INTEGRATED HANDLEBAR
(TALON ULTRA) ROUTING (MECHANICAL)
ATTENTION! If you don't install the integrated handlebar (Talon ULTRA), but instead
the traditional stem and bar (or the Talon AERO); refer to this chapter in regard to
the cable routing inside the frame. Please refer to chapter "13. STEM AND BAR
INSTALLATION AND ROUTING (FOUR CONFIGURATIONS)" for more details about
traditional stem and bar assembling.
10.1
Install the shift levers on the Talon Ultra handlebar following the OEM specs.
Handlebar cable routing:
10.2
- Route the RD housing from the left exit hole on the stem through the handlebar and
out at the right exit hole at the lever.
- Route the FD housing from the right exit hole on the stem through the handlebar and
out at the left exit hole at the lever.
Refer to chapter "4. HOUSING AND HOSE LENGTH RECCOMANDATION" for the correct
housing lengths.
- Connect RD and FD housings to the levers following OEM specs and route RD/FD
wires.
29
VIEW FROM BELOW!
CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. +39 0422 42 08 77 | fax +39 0422 42 18 16 | www.pinarello.com