Rim And Electronics - PINARELLO DOGMA F12 Series Assembly Manual

11
. BRAKE CABLE INSTALLATION (INTEGRATED HANDLEBAR)
11.1 RIM & ELECTRONIC (Di2)
Steps that must be followed before:
5. RIM BRAKE: INSTALLATION AND HOUSING ROUTING
7. ELECTRONIC GROUPSET (Di2) INSTALLATION AND CABLE ROUTING
9. INTEGRATED HANDLEBAR (Talon ULTRA) ROUTING (Electronic Di2)
11.1.1 Route the RB housing (that comes out from the head tube) into the handlebar,
the Talon ULTRA. Pass the housing from the right-hand side stem hole until the
right exit hole near the lever.
11.1.2 Connect the RB housing to the lever following OEM specs.
11.1.3 Connect the RB housing at the rear brake caliper and place the proper rubber
plug to protect the frame.
ATTENTION! Leave enough housing to allow the correct operation to the rear brake caliper.
36
CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. +39 0422 42 08 77 | fax +39 0422 42 18 16 | www.pinarello.com
33