Advertisement
Assembly Stage #3
1. Put the R/L pedal (K-5, K-6) onto the pedal arm (K-L/R) and tighten it using a knob (L-12), flat
washers (L-21), spring washers (L-13), sleeves (L-11) and carriage screws (L-14) on each
side.
Please keep in mind, the left and right pedals need to be placed in identical positions.
Assembly Stage #4
Please remove the four sets of Allen bolts (F-13) and flat washers (F-12) and spring washer
1.
(F-32) from the main frame (F).
2. Take the handlebar post (D) and pass it through the handlebar post cover (F-7).
3. Hold the handlebar post (D) and connect the lower console cable (F-11) and the upper
console cable (D-1).
Slide the handlebar post (D) into the main frame, then fix it with four sets of Allen bolts (F-13)
4.
and flat washers (F-12) and spring washer (F-33).
x4
x8
L-14
Ø6xØ13x1t
M6xP1.0x50L
x4
L-11
Ø7xØ12x30L
x8
x8
L-13
M6xP1.0
Ø6x1.5T
K-R
K-L
L-21
L-11
L-12
L-21
L-12
L-12
L-13
4
x4
F-12
Ø8xØ19x2t
x4
F-13
M8xP1.25x16L
3
L-14
L-21
Advertisement
