Advertisement
Assembly Stage #8
1. Attach the R/L upper handlebar (C-1, C-4) to the lower handlebar (E-R/L) by adding the
carriage bolts (L-2), nuts (L-3) and semicircle washers (L-4).
2. Remove the pre-installed Screws (D-2) on the handlebar post first, and then assemble the
Bottle holder (D-8) using Screw (D-2).
3. Connect the adaptor (F-8) to the DC hole (located on the back of the chain cover).
8
x4
L-3
Ø17.5xØ25x0.3t
x4
L-2
M8xP1.25x40L
L-4
x4
Ø8xØ19x2t
Advertisement
