Advertisement
Assembly Stage #1
Attach the front stabilizer (J-3) to the main frame (F-10) using four Allen bolts (L-10).
1.
Attach the rear stabilizer (J) to the main frame (F-10) using four Allen bolts (L-10).
2.
3. Please remove the handlebar post cover (F-7) from the main frame (F-10).
After the assembly, the machine can be adjusted to a slightly uneven ground by adjusting the
height of the foot caps at the front and back. The pre-assembled transportation wheels in the
front allow moving the Elliptical easily and therefore need to be pointing down at the front (45°)
during assembly.
1
Assembly Stage #2
1. Take the wave washer (L-8) and pass it through the cross disc (F-27).
2. Assemble the R/L pedal arms (K-L, K-R) to the cross disc (F-27) by adding a flat washer (L-
7), a gasket (L-6), and an Allen bolt (L-5).
x2
L-6
x2
L-8
Ø17.5xØ25x0.3t
L-5
x2
M8x30L
L-7
x2
Ø8xØ25x2
x8
L-10
M8xP1.25x16L
2
Advertisement
