Advertisement
Assembly Stage #5
1. Take the axle (D-6) and pass it through the handlebar post (D).
2. Pass the axle through the wave washer (L-8) and the lower handlebar (E-R/L), then fix with
the flat washers (L-7), gaskets (L-6) and Allen bolts (L-5) on each side.
3. Tighten the Allen bolt (L-15) with flat washers (L-16) and nylon nuts (L-9) to connect the
pedal arms (K-L/R) and lower handlebars (E-R/L) on each side.
Please note: Use two Allen key tools to fix the bolts (L-5) on both sides at the same time.
5
E-L
K-R
K-L
L-6
L-8
Ø17.5xØ25x0.3t
E-R
L-5
M8x30L
L-7
Ø8xØ25x2t
L-16
Ø8xØ16x1t
L-15
M8xP1.25x55L
x2
x2
x2
x2
x2
x2
Advertisement
