Advertisement
Drawing 16
Measuring your pulse with the hand sensors
The hand sensors are not medical products, but rather exercising tools designed for the
approximate measurement and display of the pulse rate when exercising with the crosstrainer.
RECOVERY
After exercising for a period, keep holding on the hand grips and press the RECOVERY key.
The display will stop showing any functions except for "TIME". Time starts counting down from
00:60 to 00:00
(Drawing
F2.... to F6. F1 is the best, F6 is the worst
improve the heart rate recovery status. (Press the RECOVERY button again to return to the
main display.)
Drawing 17
Noted:
1. After 4 minutes without pedaling or pulse input, the console will enter into power saving mode.
Press any key to wake the console up.
2. When the computer acts abnormally, please unplug the adaptor and plug in again.
Attention! All preset data will be lost when unplugging the power (adaptor) from the
"machine".
Hand sensor for
pluse measurement
17). The screen will display your heart rate recovery status with F1,
You can measure your pulse with the two-
hand sensor on the handle.
>> Place both hands on the hand sensor on
the handle while you exercise and wait
briefly for the pulse to be displayed.
(Drawing
18). The user may keep exercising to
Drawing 18
Advertisement
