Using The Gui To Set The Raid Policy - Dell EqualLogic PS Series Installation And Setup Manual

Installation and Setup
For example, the following command configures member1 with RAID50:
member select member1 raid-policy raid50
group1>

Using the GUI to Set the RAID Policy

For the latest information on browser support for the Group Manager GUI, see the
PS Series Release Notes.
To use the GUI to set the RAID policy for a member:
1. Log in to the group by entering the group IP address in a Web browser. Then,
in the login dialog box (Figure 3-1), enter the
the password that you specified when creating the group.
2. In the Group Summary window (Figure 3-2), expand
panel and select the member name.
Figure 3-1: GUI Login
Software Configuration
account name and
grpadmin
in the far left
Members
3–9