Using The Gui To Set The Raid Policy - Dell EqualLogic PS Series Installation And Setup
Storage arrays
Hide thumbs
Also See for EqualLogic PS Series:
- Installation and setup manual (62 pages) ,
- Hardware owner's manual (50 pages) ,
- Setting up (2 pages)
Table of Contents
Advertisement
Installation and Setup
2. At the Group Manager command prompt, enter the following command:
member select member_name raid-policy policy
Specify
RAID50
array supports only
For example, the following command configures member1 with RAID50:
member select member1 raid-policy raid50
group1>
Using the GUI to set the RAID Policy
For the latest information on browser support for the Group Manager GUI, see the
PS Series Release Notes.
To use the GUI to set the RAID policy for a member:
1. Log in to the group.
Specify the group IP address in a Web browser. Then, in the login dialog box
(Figure 3-2), enter the
specified when creating the group.
2. In the Group Summary window (Figure 3-3), expand
panel and select the member name.
3–8
,
, or
RAID5
RAID10
.
RAID50
account name and the password that you
grpadmin
Figure 3-2: GUI Login
Configuring the Software
for the
variable. The PS5500
policy
Members
in the far left
Advertisement
Table of Contents
