Dell EqualLogic PS Series Installation And Setup Manual page 29

Installation and Setup
• Connect two power supply and cooling modules to UPS systems and connect
the other module to a different source of power.
Figure 2-11: Recommended Power Configuration - PS6500
You must use the cable management system to organize your power (and network)
cables. The cable management system also enables you to open the chassis cover
without dislodging the cables.
The cable management system consists of two wire assemblies, as shown in
:
Figure 2-12
• One wire assembly has three arms, three clamps, and six fabric hook-and-loop
fasteners.
• The other wire assembly has one arm, two clamps, and three fabric hook-and-
loop fasteners.
Installing a PS6500 Array
2–19