Environmental Requirements - Dell EqualLogic PS Series Installation And Setup Manual

Installation and Setup

Environmental Requirements

You must meet these environmental requirements for a PS6000 array:
• Only operate an enclosure from a power source with a voltage range of 100 to
240 VAC.
• Make sure each power source has sufficient electrical overload protection.
• Make sure there is sufficient space for air flow in front of and behind the
array.
• Make sure the location is properly vented.
• Review the technical specifications in Table 2-2 to make sure your
environment supports its requirements.
Table 2-2: PS6000 Technical Specifications
Component
Weight of fully-loaded array
Operating temperature
Storage temperature
Operating altitude
Operational relative humidity
Thermal output (fully-loaded array) 1700 BTU/hour (SAS disks)
Operational shock
Operational vibration
Input voltage
Input frequency
System input power
Each power supply
Dimensions
Requirement
77.6 pounds or 35 kilograms
41 to 95 degrees F / 5 to 35 degrees C
-22 to 140 degrees F / -30 to 60 degrees C
10,000 feet (3048 meters)
20 to 80 percent non-condensing
1550 BTU/hour (SATA disks)
5 G for 10 ms 1/2 sin
Random 0.21grms 5 - 500 Hz
100 to 240 VAC (auto-sensing)
48 - 62 Hz
530 VA (maximum)
450 watts DC output
Maximum input power: 0.7 KVA
Input current: 7 – 3.5A
5.12 in. x 19 in. x 21.7 in.
(13 cm x 48.26 cm x 55.1 cm)
Installing a PS6000 Array
2–5