Dell EqualLogic PS Series Installation And Setup Manual page 49

Installation and Setup
Figure 3-3: Configure Member – General Settings
5. In the Configure Member – RAID Configuration dialog box (Figure 3-4), do
the following and then click
• Select the RAID policy.
• Optionally, to delay using the member's storage space until the RAID
verification completes and the batteries are fully charged, select
until the member storage initialization completes
default, the space is immediately available, although performance will not
be optimal until the RAID verification completes.
Figure 3-4: Configure Member – RAID Configuration
.
Next
Software Configuration
Wait
. By
3–11