Welding Socket Type (-Sa) - YOKOGAWA SC4AJ Series User Manual

3.1.2 Welding socket type (-SA)
Option code /SA1 and /SA2 are for the adapters special for the Welding Socket Type of the
SC4AJ. As for their dimensions, refer to section 2.5.
As shown in Figure 3.2, weld the welding socket to a pipe in which a process liquid flows.
After inserting the SC4AJ sensor into the welding socket, screw the nut with your hand.
Note: Before inserting the sensor, check the following matter.
• The socket is cooled to room temperature after welding is done.
• The O-ring is attached to the sensor.
Figure 3.2
Nut
O-ring
Welding socket
Mounting sensor (SC4AJ-SA)
< 3. Mounting and Wiring >
F3-2.ai
IM 12D08F03-02E 10th Edition: Sep. 30, 2019-00
3-2