YOKOGAWA SC4AJ Series User Manual page 13

Sample solution condition:
Although flow rate is not limited in measurement, air bubbles should not be mixed in the
sample solutions to obtain correct measured values.
Temperature sensor:
Materials
Body & Electrode:
Mounting adapter:
Weight:
Sensors:
Adapter mounting type
Adapter mounting type
Welding socket type
1 or 1.5 inch welding clamp type
2 inch welding clamp type
Note: There are weight differences among SC4AJ sensors. In order to know the more accurate weight of each type of sensors, please
calculate it from following information. The cable weighs 0.07 kg/m. The SC4AJ with 0.02 cm
than the SC4AJ with 0.1 cm
Adapters:
3/4NPT stainless steel adapter (/PS):
R3/4 stainless steel adapter (/RS):
3/4NPT PVDF adapter (/PF):
R3/4 PVDF adapter (/RF):
Straight welding socket (/SA1):
Angle welding socket 15 (/SA2):
Welding clamp 1 inch (/SB1):
Welding clamp 1.5 inch (/SB2):
Welding clamp 2 inch (/SC1): approx. 0.4 kg
Do not submerge the sensor itself in process water, as the seams between the mold and the
metal of the sensor are not waterproof.
Pt1000
Stainless steel (316L SS) (for all Fitting-type) or Titanium (only for
adapter mounting type-AD), Fluoro rubber (FKM) O-ring, EPDM O-ring
(for -SA with Variopin)
Polyvinylidene difluoride (for /PF and /RF) or Stainless steel (316 SS),
Stainless steel (316L SS)
(SC4AJ-S-AD-09-002-03): approx. 0.3 kg
(SC4AJ-S-AD-15-002-03): approx. 0.4 kg
(SC4AJ-S-SA-NN-002-03): approx. 0.5 kg
(SC4AJ-S-SB-NN-002-03): approx. 0.4 kg
(SC4AJ-S-SC-NN-002-03): approx. 0.5 kg
-1
cell constant. 314L SS electrode is 0.04 kg heavier than Titanium electrode.
NOTE
< 2. Specifications >
-1
approx. 0.1 kg
approx. 0.1 kg
approx. 0.04 kg
approx. 0.04 kg
approx. 0.3 kg
approx. 0.3 kg
approx. 0.3 kg
approx. 0.3 kg
IM 12D08F03-02E
2-2
cell constant is 0.02 kg heavier
10th Edition: Sep. 30, 2019-00