Table of Contents
Advertisement
2. INSTALLATION
2.1
Preparation
2.1.1 Unpacking and Visual Inspection
PH8ECP pH sensor is carefully packaged to guard against damage during shipment.
Inspect the instrument and items included as soon as they are received.
Note: To prevent the tip of the glass electrode and wetted part from drying out or being damaged, do not remove the transportation cap
until the sensor is to be incorporated in a flow-through type holder.
Earth Electrode
Liquid Junction
Figure 2.1
2.1.2 Installing Flow-Through Type Holder
Insure that the PH8ECP pH Sensor is installed in the flow-through type holder.
2.1.3 Installing Associated Instruments
Check that any or the pH converter, two-wire pH transmitter, and terminal box which is used to
connect cables from the pH sensor is already installed.
Sensor Body
Glass Electrode
Names of PH8ECP pH Sensor Components
< 2. INSTALLATION >
F2.1E.ai
IM 12B7J3-01E
2-1
7th Edition : Nov.20,2018-00
Advertisement
Table of Contents
