Introduction - YOKOGAWA SC4AJ Series User Manual

Introduction


Thank you for purchasing our inductive conductivity measurement system.
This manual describes the method of installing for the SC4AJ.
To ensure that this measurement system can be operated safely and also exhibit its full
performance, be sure to read this manual before use.
This manual does not describe the units in Table shown below which are the component units
of the conductivity measuring system. Each of these units comes with an instruction manual, so
read the applicable manuals for details of the units concerned.
FLXA202, FLXA21
FLXA402
SC450G
SA11
Upon delivery, unpack the instrument carefully and inspect it to ensure that it was not damaged
during shipment. If damage is found, retain the original packing materials (including the outer
box) and then immediately notify the carrier and the relevant YOKOGAWA sales office.
Make sure the model code on the label affixed to the cable agrees with your order. For the
meaning of the model code, refer to the Model and Suffix code table (Section 2.2).
Media No. IM 12D08F03-02E
All Rights Reserved Copyright © 2006, Yokogawa Electric Corporation
Manual Name
2-Wire Analyzer
4-Wire Converter
Conductivity Converter
SA11 Smart Adapter
10th Edition : Sep. 2019 (YK)
< Introduction >
IM No.
IM 12A01A02-01E
IM 12A01F01-02EN
IM 12A01F03-01EN etc.
IM 12D08N05-01E
IM 12A06S01-00EN-P
IM 12D08F03-02E
i
10th Edition: Sep. 30, 2019-00