Assembly of the sneeze guard on the buffet trolley
NOTE!
2 persons are needed to assemble all components!
1. Assemble the sneeze guard with integrated lighting on the appliance (Fig. 3).
EN
Fig. 3
2. In order to fix the sneeze guard (1), place the poles (9) in holes prepared for this
end in the body (8) of the appliance.
3. Fit the sneeze guard (1) on the poles (9) so that the factory assembled pins
would slide in the surfaces of the poles designed to this end.
4. Then, fix the sneeze guard (1) on the poles (9), using the included nuts (a), with
3 at each side.
5. Pay attention to the channels for sneeze guard (1) lighting cables.
6. Connect the lighting power cord with the designated plug.
14 / 21
Installation and operation
125614