Table of Contents
Advertisement
Power supply connection
•
Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•
Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
•
Do not use the appliance with an external timer or remote control.
•
In order to connect the 125624 model, 2 separate sockets are required.
5.2
Operation
•
Przed pier wsz ym uż yciem wycz yś cić urządz eni e i wypos ażenie zgodni e z e ws kazówkami z awartymi w pu nkcie 6 „Cz yszczen ie" . M ake s ure no water enters elec tric ins tall ati on and connection box. N as tępni e dokładni e os usz yć urz ądzenie i elementy wyposaż enia.
•
Setzen Sie di e Boden-Abdec kung in das Bec ken ei n. T he c over acts as a spac er between the heating element and l eft- over food tray.
•
Carefull y i nser t the c onnection box with the heati ng element at the bac k edge of the applianc e. A pin in bottom par t of the c onn ecti on box must enter a hol e i n the mai n applianc e. This way the connec tion box is properly mounted.
Preparation of the appliance
1. Before use, clean the appliance, observing instructions in section 6 'Cleaning'.
2. Dry the appliance thoroughly.
3. Make sure the drain tap is closed.
EN
4. Make sure that the appliance is switched off.
5. Pour water to the GN containers basin.
ATTENTION!
Never use the appliance without water.
The water level may reach maximum of 6 cm.
Check the water level in the GN container basin regularly. If needed, top up with
water.
16 / 21
Installation and operation
125614
Advertisement
Table of Contents
