Table of Contents
Advertisement
Installation and operation
Assembly of tray slides
Fig. 4
1. To assemble the support ③ (Fig. 4) of the tray slide, use 'A' and 'B' holes (the
1st and 2nd hole from the top in the wooden panel).
2. First, remove the guards from the holes.
3. Assemble the support ③ on the wooden panel, by screwing together the '1'
screw with the 'A' hole and the '2' screw with the 'B' hole.
4. Fit the tray slide ① onto the supports and fix it with the enclosed distance screw
②.
5. If needed, the tray slide may be folded (Fig. 5).
Fig. 5
•
When the appliance is move to the selected location, block the swivel castors
with parking brakes.
125614
EN
15 / 21
Advertisement
Table of Contents
