WAGO I/O SYSTEM 750 XTR
750-601/040-000 Power Supply 24 VDC Fuse XTR
3.2.2
Power Jumper Contacts/Field Supply
Figure 3: Power Jumper Contacts
Table 4: Legend for Figure "Power Jumper Contacts"
Contact
1
2
Do not exceed maximum current via power contacts!
In this case, the maximum permissible current to flow through the power contacts
is limited by the fuse (6.3 A).
When configuring the system, do not exceed this current. If it is exceeded, an
additional internal system supply module must be used.
Type
Spring contact
Spring contact
Device Description
Function
Potential feed-in (Uv) for field supply
Potential feed-in (0 V) for field supply
19
Manual
Version 2.0.0