Figure 13: Opening The Fuse Holder; Figure 14: Replacing The Fuse - WAGO 750-601/040-000 Manual

40 Startup and Service
2. Pivot cover down to open the fuse holder.

Figure 13: Opening the Fuse Holder

3. Remove the old fuse (if any) and install the new fuse.

Figure 14: Replacing the Fuse

4. Close the fuse holder.
5. Push the fuse holder back into the I/O module housing.
The field supply to the downstream I/O modules is restored when pushing the
fuse holder back into place.
Manual
Version 2.0.0
WAGO I/O SYSTEM 750 XTR
750-601/040-000 Power Supply 24 VDC Fuse XTR