Graco 24J415 Instructions - Parts Manual page 29

Communications gateway module installation kit, for use with hfr systems to provide fieldbus communications abilities, for professional use only

Hide thumbs Also See for 24J415:

Table of Contents

Available Internal Data

Data

State or

Byte

Bit

Type

Range

PLC Outputs to CGM Inputs for PLC Control Description

Toggle System Power: Turn the system OFF or ON by changing the existing value in this

byte. System power is ON when the ADM is in any active mode. System power is OFF

when the power LED is in the yellow state. See Input Bit 83.4 for System Power Status.

Integer

To turn the System power ON or OFF, write a different value to the System Power byte.

Changing the value will toggle the state from ON to OFF or OFF to ON.

Example: If the power is ON sending word 26 a "5" will turn the power OFF. To turn the

power back ON, Send any value other than a "5".

3A1704N

Table of Contents