Graco 24J415 Instructions - Parts Manual page 7

EtherNet/IP Fieldbus Screens
These screens are shown only if you have a EtherNet/IP
Fieldbus CGM installed. See Kits on page 2.
Screen 1
This screen enables the user to set the IP address,
DHCP settings, subnet mask, gateway, and DNS infor-
mation.
F . 10: EtherNet/IP Fieldbus Screen 1
IG
Screen 2
This screen displays the hardware revision, system
serial number, and data map identification information.
F . 11: EtherNet/IP Fieldbus Screen 2
IG
3A1704N
DeviceNet Fieldbus Screen
This screen is shown only if you have a DeviceNet
Fieldbus CGM installed. See Kits on page 2.
This screen enables the user to set the device address
and baud rate, and to view the hardware revision, sys-
tem serial number, data map identification information.
F . 12: DeviceNet Fieldbus Screen
IG
Setup
7