Installation
4. If used, connect the ethernet, DeviceNet, or PROFI-
BUS cable to the CGM as applicable. Connect the
other end of the cable to the FieldBus device.
F
. 3: Cable Connections
IG
5. Connect cable (LC0032) to the MCM, port 2B, and a
customer provided signal device. The signal device
must have isolated, dry contacts.
6. Perform the Install or Update Data Map procedure
in CGM manual 312864.
7. See Available Internal Data on page 9 for details
on FieldBus pinout setup.
8. Perform Setup on page 5 to configure the fieldbus.
4
ti11985a
3A1704N