Advertisement
Quick Links
Futuro Futuro
Futuro Futuro
RANGE HOOD
INSTALLATION MANUAL
MODEL: NATALIE ISLAND
NOTE: PRIOR TO INSTALLATION
Please inspect range hood visually,
as well as connect it to power supply
and test its operation.
2
1.) Loop supporting wire through lock-nut.
2.) Tighten the screw so the wire is secure.
1.) Thread the supporting wire
4
through tabs of mounting ring,
with lock-nut/screw combination
INSIDE the ring, as shown.
2.) Secure the lock-nut/screw
combinations to the ceiling.
1
Recommended
Installation
Height
1.) Positioning: range hood should be centered over the cooking area.
3
2.) Place mounting ring on ceiling & mark location of holes with marker/awl.
3.) Remove mounting ring & drill holes according to markings.
4.) Secure mounting ring to ceiling with screws (and if needed, anchors).
1.) Thread supporting wires through trim plate.
5
2.) Raise trim plate to ceiling & secure with screws.
3.) Bring range hood body to supporting wires.
Height X
variable according
to ceiling height
(Ceiling height
minus 36" countertop
minus 26"-28" spacing)
26" - 28"
from cooktop
to bottom
of hood
Advertisement
Related Manuals for Futuro Futuro NATALIE ISLAND
Summary of Contents for Futuro Futuro NATALIE ISLAND
- Page 1 Recommended (Ceiling height INSTALLATION MANUAL minus 36” countertop Installation minus 26”-28” spacing) MODEL: NATALIE ISLAND Height NOTE: PRIOR TO INSTALLATION 26” - 28” Please inspect range hood visually, as well as connect it to power supply from cooktop and test its operation.
- Page 2 1.) Loosen lock nuts on top of hood body. 2.) Thread supporting wire into lock nut. 3.) Level & adjust the hood body. (Excess wire can be left hanging inside hood body). 4.) Tighten the lock nuts. 1.) Unscrew trim plate from mounting ring. 2.) Lower trim plate.
Need help?
Do you have a question about the NATALIE ISLAND and is the answer not in the manual?
Questions and answers