Chapter 5 System Configuration; System Configuration; Overall System Configuration; System Configuration For The Initial Setup, Maintenance, And Inspection - Mitsubishi Electric MELSEC iQ-R Series User Manual

5

SYSTEM CONFIGURATION

This chapter shows the system configuration of an OPC UA server module.
5.1
System Configuration

Overall system configuration

The following figure shows the overall system configuration when using an OPC UA server module.
(1)
(3)
CC-Link IE Control, CC-Link IE Field, CC-Link, Ethernet ...
(1) OPC UA client
(2) SCADA
(3) OPC UA server module
(4) SD memory card
(5) Configuration personal computer (configuration tool)
For available CPU modules and the number of mountable ones, refer to the following:
MELSEC iQ-R Module Configuration Manual
System configuration for the initial setup, maintenance, and
inspection
For the initial setup, maintenance, and inspection, connect an OPC UA server module and a configuration personal computer
directly. (Page 48 Direct connection, Page 49 Considerations for direct connection)
(1)
(1) OPC UA server module
(2) Ethernet (twisted pair cable)
(3) Configuration personal computer
For initial setting, only Ethernet port (CH1) can be used.
For using the Ethernet port (CH2), set a network in the network setting in the configuration Tool.
MELSEC iQ-R OPC UA Server Module User's Manual (Application)
(2)
(4)
(2)
Ethernet
(5)
(3)
5 SYSTEM CONFIGURATION
5.1 System Configuration
5
47