Writing the setting
If verifying a setting written to a module in the configuration tool the version of which is '1.01B' or later in the
configuration tool the version of which is '1.00A', it cannot be verified correctly. Update the configuration tool to
the latest version before verification.
8.3
Operation Check
This section shows the procedure to check whether an OPC UA client can access an OPC UA server.
1.
Search an OPC UA server module from an OPC UA client, and connect the module.
2.
Check whether the device (M0) of the CPU module can be read and written.
For the operation methods of an OPC UA client, refer to the manual of an OPC UA client to use.
For MC Works64, add 'ua:' at the beginning of the endpoint URL of an OPC UA server module.
(Example) ua:opc.tcp://192.168.3.3:4840
1.
Select [Online] [Write to OPC UA Server Module].
2.
After completing the writing, reset the CPU module and
start the OPC UA server module.
8 OPERATION EXAMPLE
8.3 Operation Check
8
63