Mitsubishi Electric MELSEC iQ-R Series User Manual page 42

5.
Add an OPC UA server module.
Item
Module Type
Module Name
Mounting Slot No.
Start I/O No. Specification
Start I/O No.
6.
Set whether to use module labels, click the [OK] button.
7.
Set the module parameters of an OPC UA server module.
[Navigation window]  [Parameter]  [Module Information]  [RD81OPC96]
8.
After setting the parameter, write the setting to a CPU module from an engineering tool.
9.
Reset the CPU module or turn the power OFF and ON to apply the setting.
4 PROCEDURE BEFORE OPERATION
40
4.3 Parameter Setting
Description
Select "Information Module."
Select "RD81OPC96."
Select the slot number where an OPC UA server module is mounted.
Select "Not Set" when not specifying the start I/O number of an OPC UA server module; otherwise, select "Set."
When selecting "Set" for "Start I/O No. specification", enter the start I/O number of an OPC UA server module.