Installation; Mechanical Installation; Pole Mount Kit; Duct Mount Kit - Dräger Polytron 8000 Series Technical Manual

Installation

5 Installation
5.1

Mechanical installation

The instrument can be mounted for measuring gases in ambient air or inside of a
duct/pipe.
1. Use M6 (1/4'') bolts with hex socket caps to mount the enclosure to one of the
following options.
Option
Mounting on a flat surface
Mounting on a pole
Mounting on a duct/pipe
5.1.1

Pole Mount Kit

The enclosure is mounted to the Pole Mount Kit with the included 4 screws,
washers, and hexagon nuts.
The clamping rings for fastening the kit to a pole are not included.
5.1.2

Duct Mount Kit

The enclosure is mounted to the Duct Mount Kit with the included 4 screws,
washers, and hexagon nuts.
The Duct Mount Kit can be fitted lengthwise or crosswise to the duct.
The clamping rings for fastening the Duct Mount Kit are not included.
5.1.2.1 Duct Mount Kit Polytron
For installation instructions refer to 9033235.
20
Accessory
Drilling template: 4544299
Additionally for Polytron
Spacer 6812617
Pole mount kit: 4544198
Duct mount kit: 6812725
For Polytron
6812300
a 50 ... 155 mm
2'' ... 6''
®
8xx0 except Polytron
Technical Manual
®
87x0 IR:
®
87x0 IR::
®
87x0 IR
|
®
Dräger Polytron 8000 Series