Keysight Technologies N9030B Installation Notes page 3

Option B85 or B1X Retrofit Kit
Products Affected:
Serial Numbers:
To Be Performed By:
Estimated Installation Time:
Estimated Adjustment Time:
Estimated Verification Time:
Introduction
This installation note explains how to install the hardware and provides guidelines for adjustment
and verification for the following upgrade kits for N9030B PXA signal analyzers:
— Option B85, Analysis Bandwidth Upgrade, 25 MHz, or 40MHz, to 85 MHz, Hardware and
License
— Option B1X, Analysis Bandwidth Upgrade, 25 MHz to 160 MHz, Hardware and License
— Option BU3, is the ordering number for the retrofit kit that installs option B1X on instruments
with option B40 previously installed.
Refer to http://www.keysight.com/find/pxa_upgrades
In addition to installing the licenses and hardware to support options B85, or B1X, as appropriate,
the Option B85 and Option B1X kits also include a license for N9030B-B40.
Installation Note N9030-90075
Option B85 or B1X Retrofit Kit
N9030B PXA, Option 503, 508, 513, 526, 544, 550
All
(X) Keysight Service Center
(X) Personnel Qualified by Keysight
( ) Customer
1.5 Hours
1.0 Hours
4.0 Hours
for information on all available upgrades
3