6.4.5
LS18 flown vertically
Required items
-
1 x Bumper (GPT-BUMPER)
-
M x pairs of LS rigging plates (LST-XBOW) for M x LS18 cabinets
-
4 x M Quick release pins (VXT-BL820) for M x LS18 cabinets
-
1 hoist (not provided)
Procedure
-
Insert LST-XBOW into connecting plates of both sides of LS18s
Page 54 / 109
PS SERIES HARDWARE SETUP PROCEDURE
Maximum LS18 quantity for flown vertical cluster is 6 (and eventually less)
Please check NS-1 for mechanical Safety Working Load computations.
Please check configuration in NS-1 for proper motor hoist rating
LS18 XBOW ANGLE SETTINGS PLATE
System Manual PSR2 Series
IMPORTANT
IMPORTANT