Ps And Ls Recommended Amplification; Ps And Ls Setups On Nexo Td Controllers - Nexo PSR2 Series System Manual

Long speaker cables induce capacitive effects – up to hundreds of pF depending on the quality of the
cable - with a low-pass effect on high frequencies. If long speaker cables must be used, ensure that they
2.3

PS and LS recommended amplification

NEXO TD Controllers
DTD Controller + DTDAMP4x0.7 (4x0.7kW/4)
DTD Controller + DTDAMP4x1.3 (4x1.3kW/4)
DTD Controller + DTDAMP4x1.3 Bridge Stereo (2x2.6kW/8)
NXAMP4x1mk2 Powered Controller 4 channels mode (4x1.3kW/2)
NXAMP4x1mk2 Powered Controller Bridged Stereo mode (2x2.6kW/4)
NXAMP4x2mk2 Powered Controller 4 channels mode (4x2.5kW/2)
NXAMP4x4mk2 Powered Controller 4 channels mode (4x4.5kW/2)
2.4

PS and LS setups on NEXO TD Controllers

Please consult nexo-sa.com for NEXO TD Controllers firmware information.
Page 10 / 109
PS AND LS GENERAL SET-UP INSTRUCTIONS
IMPORTANT
do not remain coiled while in use.
System Manual PSR2 Series
Recommended amplification
2 x PS8 per channel
2 x PS8 per channel
1 x LS400 per channel
1 x PS10R2 per channel
1 x LS600 per bridged channels
1 x PS15R2 in passive mode per bridged channels
1 x LS18 per bridged channels
3 x PS8 per channel
2 x LS400 per channel
2 x PS10R2 per bridged channels
2 x LS600 per bridged channels
2 x PS15R2 in passive mode per bridged channels
2 x LS18 per bridged channels
4 x PS8 per channel
3 x LS400 per channel
3 x PS10R2 per channel
2 x LS600 per channel
2 x PS15R2 in passive mode per channel
2 x PS15R2 in active mode: 2 channels
1 x LS18 per channel
4 x PS8 per channel
3 x LS400 per channel
4 x PS10R2 per channel
4 x LS600 per channel
4 x PS15R2 in passive mode per channel
4 x PS15R2 in active mode: 2 channels
3 x LS18 per channel