Analog Devices AD9739A Manual page 11

AD9739A Native FMC Card / Xilinx Reference Designs [Analog Devices Wiki]
designed or reviewed by Analog Devices, care should be taken to ensure that these will meet
your needs before purchase. While ADI will always provide chip level support on
EngineerZone™
[http://ez.analog.com/]
manufacture or creator of the specific materials.
References to manufacturer or third party software, websites, or to any specific commercial or
non-commercial products are suggestions only and do not necessarily constitute or imply an
endorsement, recommendation, or favoring by Analog Devices.
22 Sep 2011 16:30
4 x independent DVB-T channels, RF output (0 to 1.250 GHz) from MVD Cores
■
[http://www.mvd-fpga.com/cores/en/digilent_AD9739A_xilinx_eval.html]
4 x independent ATSC channels, RF output (0 to 1.250 GHz)from MVD Cores
■
[http://www.mvd-fpga.com/cores/en/digilent_AD9739A_xilinx_eval.html]
4 x independent J.83B channels, RF output (0 to 1.250 GHz) from MVD Cores
■
[http://www.mvd-fpga.com/cores/en/digilent_AD9739A_xilinx_eval.html]
4 x independent DVB-C J.83A/C channels, RF output (0 to 1.250 GHz) from MVD Cores
■
[http://www.mvd-fpga.com/cores/en/digilent_AD9739A_xilinx_eval.html]
Tar file contents
The tar file contains, in most cases, the following files and/or directories. To rebuild the
reference design simply double click the XMP file and run the tool. To build SDK, select a
workspace and use the C file to build the elf file. Please refer to Xilinx EDK documentation
[http://www.xilinx.com/support/documentation/dt_edk_edk13-2.htm]
license.txt ADI license & copyright information.
system.bsb BSB wizard file.
system.mhs MHS file.
system.xmp XMP file (use this file to build the reference design).
data/ UCF file and/or DDR MIG project files.
docs/ Documentation files (Please note that this wiki page is the documentation for the reference design).
ise/ ISE project file(s) (for stand alone build) and/or simulation.
pcores/ Reference design core file(s) (Xilinx EDK).
scripts/ Individual scripts for platgen, xst, xflow etc. for command line run.
sw/ Software (Xilinx SDK) & bit file(s).
tb/ Test bench source file(s).
More information
Purchase AD9739A-FMC-EBZ
■
converters/ad9739a/products/EVAL-AD9739A/eb.html]
VITA's FMC info
■
ask questions about the FPGA reference design
■
ask questions about the AD9739A
■
speed_dacs]
http://wiki.analog.com/resources/fpga/xilinx/fmc/ad9739a?force_rev=1
, board level, or reference design support is given by the
[http://www.analog.com/en/digital-to-analog-converters/da-
[http://www.vita.com/fmc.html]
[http://ez.analog.com/community/data_converters/high-
for details.
[http://ez.analog.com/community/fpga]
Page 11 of 12
the
5/22/2012