VERITAS 2U12 Hardware Service Procedure page 5

Caution: You must complete a power supply swap within three minutes. Leaving the power supply
slot open for longer than three minutes can result in the appliance overheating and cause other
components to fail.
Warning: Swap one power supply at a time only. If you need to remove all the two power supplies,
make sure that the storage shelf is turned off before you proceed.
Installing the replacement Veritas 2U12 Storage Shelf power supply
Use the following procedure to install the replacement power supply in the Veritas 2U12 Storage
Shelf.
To install the replacement Veritas 2U12 Storage Shelf power supply
1 Remove the replacement power supply from any wrapping.
2 Insert the power supply into a power supply slot.
HSP 159: Power supply replacement: Veritas 2U12 Storage Shelf
5