Parent Unit Power Supply - Motorola MBP669CONNECT User Manual

2.3

Parent Unit Power Supply

1. Insert the DC Micro-USB plug of the power adapter into the micro-USB
power socket on the side of the Parent Unit.
2. Connect the other end of the power adapter to a suitable mains power
socket. The blue Charging indicator turns on.
IMPORTANT
Only use the supplied power adapter (5V DC / 1000mA) and battery pack.
While the Parent Unit can work with the power adapter connected, without a
battery pack, it is recommended that you install and charge the rechargeable
battery pack fully before use. This will allow the Parent Unit to operate on
battery in the event of a power failure, or when moving to a different room.
3. Once the Baby and Parent Units are both switched ON, the display on the
Parent Unit will show the colour image captured by the Baby Unit. But if the
room is dark, the image will be displayed in black and white and with a
icon, due to infra-red illumination by the Baby Unit.
4. If there is no connection or you are out of range, the video display will go
off, a symbol will appear on the LCD screen, and the Parent Unit will
beep. Move the Parent Unit closer to the Baby Unit to re-establish the link.
12 Getting Started