Parent Unit Power Supply - Motorola VM483 User Manual

2.3

Parent Unit Power Supply

1. Insert the DC plug of the power adapter into the DC socket on the side of
the Parent Unit.
2. Connect the other end of the power adapter to a suitable electrical outlet.
The AC power/battery status indicator lights up in red.
IMPORTANT
Only use the supplied power adapter and battery pack. While the Parent Unit
can work with the power adapter connected, without a battery pack, it is
recommended that you install and charge the rechargeable battery pack fully
before use. This will allow the Parent Unit to operate on battery in the event of a
power failure, or when moving to a different room.
3. Once the Baby and Parent Units are both switched ON, the power/link
indicator will light up green and the display on the Parent Unit will show the
color image captured by the Baby Unit. But if the room is dark, the image
will be displayed in black and white and with a
illumination by the Baby Unit.
4. If there is no connection or you are out of range, the power/link indicator
will flash green and the display will change to the Motorola screen and the
symbol will flash in the center of the screen. Move the Parent Unit
closer to the Baby Unit to re-establish the link.
12
icon, due to infra-red
Getting Started