Cleaning And Maintenance - Cuisinart Smart Stick HB-155PC Instruction And Recipe Booklet

5. Press and hold the On/Off button. The hand blender will continue
to run as long as the button is pressed. To turn the hand blender
off, simply release the On/Off button.
Note: Do not continuously blend for longer than 60 seconds.
Release On/Off button for 20–30 seconds between 60-second
blending cycles.
6. Unplug immediately after use.
WHISKINg
1. Insert the whisk assembly into the motor body.
(See Assembly for Whisk Attachment, previous page.)
2. Plug electrical cord into a wall socket.
3. Put the whisk into mixture that will be blended.
4. Turn the variable speed knob to the desired speed,
then press and hold the On/Off button. The hand
blender will continue to run as long as the button is
pressed. Release the On/Off button and the blade will
stop running.
5. Unplug immediately after use.

CLEANINg AND MAINTENANCE

SMART STICK
Always clean the motor body and blending shaft thoroughly after
each use.
Press the release button to remove the blending shaft from the motor
body. Clean the motor body only with a sponge or damp cloth. Do not
use abrasive cleaners that could scratch the surface. To clean the
blending shaft, wash by hand in hot water using mild detergent. The
blending shaft is not dishwasher safe. Be mindful of the fixed-mount
razor-sharp blade edges.
Never immerse the motor body in water.
When the appliance has malfunctioned or has been dropped or
damaged in any way or it is not operating properly, return the
appliance to the nearest Cuisinart Repair Center for examination,
repair or mechanical or electrical adjustment. Any other servicing
should be performed by an authorized service representative.
WHISK ATTACHMENT
To clean your whisk assembly, press the release button to release it
from the motor body housing. Detach the metal whisk from the
gearbox by pulling the pieces apart. To clean the gearbox, simply wipe
with a damp cloth. To clean the metal whisk, wash with warm soapy
water or put in the dishwasher. Do not submerge the gearbox in
water or any other liquid. Any service, other than cleaning and
normal user maintenance, should be performed by an authorized
Cuisinart Service Representative.
VARIABLE SPEED HAND BLENDER
®
9