Download Print this page

Cleaning And Maintenance - Cuisinart VersaMix HB-950XA Instruction Booklet

800w hand blender

Advertisement

NOTE: Due to the powerful motor provided with this unit,
Cuisinart recommends using one hand to support the work bowl
during operation.
7.
When you have finished processing the food, stop the machine
by taking your finger off the variable speed button.
WHEN THE BLADE STOPS MOVING
8.
9.
Remove the motor unit from the chopper lid by pressing the
release button on the back of the motor unit and pull apart, then
remove the chopper lid from the work bowl by turning it
counterclockwise.
10. Carefully remove the chopping blade, holding it by the gripping
ridges on the plastic sheath.
ITSELF
.
11. Remove food with a spatula.
NOTE: Do not operate the chopper attachment without food
in the work bowl.
Caution:
Be sure the chopper lid is securely locked in place before
operating the appliance.
As a safety precaution, when chopping is complete,
first disassemble the motor unit from the chopper lid,
then remove the chopper lid. Never remove the chopper
lid with the motor unit in place.

CLEANING AND MAINTENANCE

Unplug your VersaMix hand blender before cleaning.
Clean motor body and blending shaft thoroughly after each use.
Press the attachment release button to remove the blending shaft
from the motor body. Clean the motor body only with a sponge or
damp cloth. Do not use abrasive cleaners that could scratch the
surface.
To clean the blending shaft, wash by hand in hot water using mild
detergent. The whisk, chopper bowl, and beaker are dishwasher safe.
Be mindful of the fixed-mount, razor-sharp blade edges.
Never immerse the motor body in water. The unit must be
thoroughly dry before operation.
CHEF'S WHISK ATTACHMENT
To clean your whisk assembly, press the attachment release button to
release it from the motor body housing. Detach the metal whisk from
the gearbox by pulling the pieces apart. To clean the gearbox, simply
wipe with a damp cloth. To clean the metal whisk, wash with warm,
soapy water or put in the dishwasher. Do not submerge the gearbox
in water or any other liquids.
, unplug the unit.
NEVER TOUCH THE BLADE
10

Advertisement

loading