Heat/Cool Mode Change - Salus HTRP230V Full User Manual

5.4 Heat/cool mode change

HTRP230V(50) as a programmable thermostat gives possibility to create temperature schedules for whole week. Moreover, functions such as holiday
mode, party mode or frost protection mode are activated/deactivated individually. Thermostat can be switched between heating or cooling modes via
„CO" terminal.
Heating/cooling modes can be changed manually or by the external ON/OFF switch. Look at the instructions below:
MANUALLY:
1
3 sec.
Hold button for 3 seconds to
enter the menu.
Move in settings using
and buttons.
By external ON/OFF switch:
1
In the installer parameters, change
the D18 parameter to „1". Move in
settings using and
Confirm by button.
24
2
Set thermostat for heating using
2
buttons.
3
and buttons.
Confirm by button.
NSB input in
Wejście NSB
SLAVE thermostat
w regulatorze SLAVE
NSB output
Wyjście NSB
HTRP 230
CO
/
L
L
Connect the CO output of the
thermostat together with the external switch
according to the diagram above.
T30NC
N
HTRP 230
N
S1
N
SL
CO
KL08 NSB
S1
L L
N N
N