Self-Timer - Leica Q2 MONOCHROM Instruction Manual

EN
Notes
• Appears on the LCD panel if the bracketing function is
activated. You can watch the effect of the function on screen
while the pictures are taken (brighter or darker).
• Depending on the exposure mode, the exposure gradations are
produced by changing the shutter speed and/or aperture value:
– Shutter speed (A/M)
– Aperture (S)
– Shutter speed and aperture value (P)
• The picture sequence: underexposure/correct exposure/
overexposure.
• The working range for automatic bracketing may be limited
depending on the available shutter speed/aperture combination.
• With automatic ISO sensitivity control enabled, the sensitivity
calculated by the camera automatically for the raw picture will
also be applied to all other pictures in a series, i.e. the ISO value
will not change during bracketing. This may mean that the
slowest shutter speed specified under
exceeded.
• The focus range for automatic bracketing may be limited
(depending on the originally set shutter speed). The specified
numbers of pictures will be taken regardless. Several pictures in
a series may consequently be taken with the same exposure
values.
• The function remains active until another function is selected in
the submenu. If no other function is selected, another
Drive Mode Drive Mode
series of pictures is taken each time the shutter button is
pressed.
92
is
Min. Shutter Speed Min. Shutter Speed

SELF-TIMER

The self-timer function allows taking pictures with a preset time
delay. We recommend that the camera is placed on a tripod.
▸ Select in the main menu
Self Timer Self Timer
▸ Select /
Self Timer 2 s Self Timer 2 s Self Timer 12 s Self Timer 12 s
▸ Shutter release
• The remaining time until exposure is counted down on screen.
The self-timer LED at the front of the camera counts down the
delay time. It flashes slowly during the first 10 s, then fast for
the last 2 s.
• The self-timer delay time can be canceled at any time by
taping the shutter button; the relevant settings remain intact.
Notes
• Exposure metering is done first; in autofocus mode, focusing is
first. Only then will the delay time commence.
• The function remains active until another function is selected in
the submenu.
Self Timer Self Timer
• The self-timer function is only available for individual recordings.