INTERVAL SHOOTING
EN
This camera allows you to capture motion sequences over
extended periods of time automatically using the interval shooting
function. You specify the number of pictures, the intervals between
pictures, and the start time of the series.
The exposure and focus settings are no different from those for
normal pictures, but you should remember that the lighting
conditions may change during the course of the picture series.
SPECIFYING THE NUMBER OF PICTURES
▸
Select
in the main menu
Drive Mode
Drive Mode
▸
Select
Interval Shooting
Interval Shooting
▸
Select
Number of Frames
Number of Frames
▸
Enter the desired value
SPECIFYING THE INTERVALS BETWEEN SHOTS
▸
Select
in the main menu
Drive Mode
Drive Mode
▸
Select
Interval Shooting
Interval Shooting
▸
Select
Interval
Interval
▸
Enter the desired value
132
SETTING THE DELAY TIME
▸
Select
in the main menu
Drive Mode
Drive Mode
▸
Select
Interval Shooting
Interval Shooting
▸
Select
Countdown
Countdown
▸
Enter the desired value
To get started
▸
Press the shutter button
• The remaining time until the next exposure and its number is
displayed at the top right.
• The LCD panel will switch off automatically between
recordings. Tapping the shutter button reactivates the LCD
panel before the next exposure.
To cancel a running serial exposure
▸
Press the joystick
• A small menu appears.
▸
Select
End
End