Floating Iso; Asa Sensitivity - Leica SL2 Instruction Manual

FLOATING ISO

This function complements Auto ISO. Light strength changes with
many zoom lenses when the focal length is changed. Floating ISO
will in this situation adjust the sensitivity in fine graduations and
will simultaneously ensure that the selected settings of exposure
value and shutter speed remain constant in (semi) automatic
exposure modes. This will specifically in video recordings prevent
visible jumps in brightness.
Factory setting:
On On
▸ Select in the main menu
Floating ISO Floating ISO
▸ Select
On On
Notes
• can work only if the original ISO setting allows scope
Floating ISO Floating ISO
for change, i.e. the highest/lowest ISO setting is not already
being used. The warning icon will be displayed in that
Floating ISO Floating ISO
case.
• This function is not available in Cine mode.

ASA SENSITIVITY

(Cine-Mode)
The sensitivity setting in Cine mode is always done manually. The
menu item replaces the menu item
Exposure Index Exposure Index
stated in ASA units. Automatic settings (Auto ISO/Floating ISO) are
unavailable.
Factory setting:
400 ASA 400 ASA
▸ Select in the main menu
ISO ISO
▸ Select the desired setting
( , , ,
50 ASA 50 ASA 100 ASA 100 ASA 200 ASA 200 ASA 400 ASA 400 ASA
, ,
6400 ASA 6400 ASA 12500 ASA 12500 ASA 25000 ASA 25000 ASA
. The value is
ISO ISO
, , ,
800 ASA 800 ASA 1600 ASA 1600 ASA 3200 ASA 3200 ASA
, )
50000 ASA 50000 ASA
EN
,
155