VIDEO AUXILIARY DISPLAYS
ASPECT RATIO DISPLAY
The actually recorded aspect ratio depends on the set resolution
(see p. 96). It is possible, however, to have colored auxiliary lines
displayed to show other aspect ratios (e.g. 4:3). Multiple auxiliary
lines can be displayed at the same time. No auxiliary lines are
displayed in factory settings.
▸
Select
in the main menu
Video Aspect Ratio
Video Aspect Ratio
▸
Select the desired setting
(
,
,
1.33:1 (4:3)
1.33:1 (4:3)
1.66:1 (5:3)
1.66:1 (5:3)
1.78:1 (16:9)
1.78:1 (16:9)
▸
Select
/
On
On
Off
Off
Notes
• The format limits of a wider aspect ratio (than that of the
recorded video) are indicated by horizontal green lines, those of
a narrower one by vertical red lines.
• The auxiliary lines are labeled with the relevant aspect ratio.
,
,
,
)
1.85:1 (37:20)
1.85:1 (37:20)
2.35:1
2.35:1
2.40:1
2.40:1
SAFETY AREA
Depending on the playback device used, a small area of the image
borders may be invisible. It is therefore possible to display a "safety
area" in a configurable width. The image is displayed with a
relevantly proportioned frame around the desired image section.
Multiple safety area frames can be displayed at the same time. No
safety area frames are displayed in factory settings.
▸
Select
in the main menu
Video Safety Area
Video Safety Area
▸
Select the desired setting
(
,
,
,
)
80%
80%
90%
90%
92.5%
92.5%
95%
95%
▸
Select
/
On
On
Off
Off
EN
101