Wind Noise Reduction; Time Code; Time Code Mode - Leica SL2 Instruction Manual

WIND NOISE REDUCTION

EN
Wind noise reduction can be adjusted individually for the internal
and the external microphone.
INTERNAL MICROPHONE
Factory setting:
Low Low
▸ Select
Video Settings Video Settings
▸ Select
Wind Elimination Wind Elimination
▸ Select
Internal Microphone Internal Microphone
▸ Select the desired setting
( , , )
High High Low Low Off Off
EXTERNAL MICROPHONE
Factory setting:
Off Off
▸ Select
Video Settings Video Settings
▸ Select
Wind Elimination Wind Elimination
▸ Select
External Microphone External Microphone
▸ Select the desired setting
( , , )
High High Low Low Off Off
98
in the main menu
in the main menu

TIME CODE

The time code is a data record that is generated and recorded
alongside the image and audio data. It ensures the correct time
assignment of picture and audio signals after cutting or after later
separate processing. Time code mode and start time can be
selected.

TIME CODE MODE

Time information is written to the recorded video file if the time
code setting is activated.
Factory setting:
Off Off
Timekeeping begins at 00:00:00.00 for every
Off Off
recording.
The timer continues running regardless of whether the
Free Run Free Run
camera is currently recording video.
The timer only runs while a video is being recorded.
Rec Run Rec Run
The timer will stop when recording ends and will
continue when the next recording starts.
Select in the main menu
Video Settings Video Settings
▸ Select
Time Code Time Code
▸ Select
Mode Mode
▸ Select the desired setting
( , , )
Off Off Free Run Free Run Rec Run Rec Run