Interval Shooting - Leica Q2 Instruction Manual

INTERVAL SHOOTING

EN
This camera allows you to capture motion sequences over
extended periods of time automatically using the interval shooting
function. You must specify the interval between shots and the
number of frames in the series.
SPECIFYING THE NUMBER OF PICTURES
▸ Select in the main menu
Drive Mode
▸ Select in the submenu
Interval
▸ Select
Frames
▸ Enter the desired value
SPECIFYING THE INTERVALS BETWEEN SHOTS
▸ Select in the main menu
Drive Mode
▸ Select in the submenu
Interval
▸ Select
Interval
▸ Select the desired interval between shots
88
Notes
• A running series of pictures can only be aborted by switching off
the camera. The relevant settings remain unchanged, which
means that tapping the shutter button again after switching the
camera on will restart the series.
• The camera may switch off and on again if "Auto power off" is
set and no other camera operation occurs between the
individual shots.
• Interval shooting over an extended period of time in a cold
location or in a place with high temperature and humidity may
result in malfunctions.
• Interval shooting will be interrupted or canceled in the following
situations:
– if the battery is depleted
– if the camera is switched off
Make sure to check the battery for sufficient charge.
• Interrupted or canceled interval shooting an be resumed by
switching the camera off, replacing the battery or memory card
as needed and then switching the camera back on. The pictures
taken after function interruption will be stored in a separate
group. A prompt will be displayed on screen if the camera is
switched off and on again while the
active.
shooting function is
Interval