Leica SL2 Instruction Manual page 201

Camera does not recognize the memory card
Menus and displays
Viewfinder is dark
Display language is not English
The LCD panel is to dark or too bright/not clear
menu does not appear
Favorites Favorites
Live View stops suddenly or doesn't start
The brightness in Live View mode is not the same
as in the pictures
The number of remaining exposures does not count
down after a picture is taken
Recording
The camera won't take a picture/shutter button is
deactivated
No picture is taken
The memory card is not compatible or defective
Memory card is incorrectly formatted
EVF brightness is set too low
-
The brightness setting is incorrect
The favorites menu is empty
The camera is hot due to high ambient temperature,
extended Live View operation, extended video
recording or serial exposures
The brightness settings for the LCD panel have no
influence over the exposures
The exposure requires only very little memory space
Memory card is full
The memory card is not formated
The memory card is write protected
Dirt on the memory card contacts
The memory card is damaged
The sensor is overheating
The camera has switched off automatically (automatic
shutdown)
Picture data is being written to the memory card and
the cache is full
Noise reduction function is working (e.g. after night
photography with long exposure times)
Battery is depleted
Camera is processing a picture
The camera is connected to the Leica FOTOS app
Check the compatibility of the memory card (See
"Technical Data")
Format the memory card (Caution: Loss of data!)
Set the EVF brightness
Select in the menu
English English Language Language
Adjust the display brightness
Add at least one function
Allow camera to cool down
Adjust the brightness settings as needed
This is not a fault; the number of remaining exposures
is calculated as approximations
Replace the memory card
Reformat the memory card
(Caution: Loss of data!)
Deactivate the write protection on the memory card
(small lever on the side of the memory card)
Clean the contacts with a soft cotton or linen cloth
Replace the memory card
Allow camera to cool down
Switch the camera on again
deactivate auto shutdown as needed
Wait
Wait or deactivate noise reduction
Charge or replace the battery
Wait
End connection and reconnect
EN
201