ISO SENSITIVITY
The sensitivity can be additionally adjusted. This setting will apply
for all info profiles.
Factory setting:
Low
Low
▸
Select
in the main menu
Focusing
Focusing
▸
Select
Focus Assist
Focus Assist
▸
Select
Peaking Sensitivity
Peaking Sensitivity
▸
Select the desired setting
(
,
)
Low
Low
High
High
Note
• Focus peaking is based on subject contrast, i.e. differences
between light and dark. As a result, high contrast subject parts
could be marked, even if they are not completely in focus.
CLIPPING/ZEBRA
The Clipping/Zebra display marks very bright image areas. This
function is a very easy and exact tool for checking the correct
exposure setting. The two displays differ as follows:
– In picture mode: Clipping (flashes black)
– In video mode: Zebra (black/white striped pattern)
SETTING THE LIMIT VALUE
You can set a threshold value for these displays, i.e. define a value
at what degree of overexposure they will appear, so that you can
adjust these displays to specific conditions or in line with your own
composition ideas.
▸
Select
in the main menu
Camera Settings
Camera Settings
▸
Select
Capture Assistants
Capture Assistants
▸
Select
Setting
Setting
▸
Select a profile
▸
Select
Clipping / Zebra
Clipping / Zebra
▸
Select
Upper limit
Upper limit
▸
Select the desired value
(
to
)
200
200
255
255
EN
83