Leica SL2 Instruction Manual page 204

EN
Review/playback and video/image management
Pictures taken in portrait format are displayed in
landscape format
Selected images cannot be deleted
File numbering does not start at 1
The time and date settings are incorrect or are not
displayed
The time and date stamp on images are incorrect
The time and date stamp on images are unwanted
Pictures/recordings are damaged or missing
Parts of my video scenes are not fully in the picture Difference of aspect ratios between camera and
Review/playback unavailable
Picture quality
The picture is too bright
Image noise
Unnatural colors
Round white stains, similar to soap bubbles
Images are out of focus
204
-
Some of the selected images are write protected
The memory card contains previously stored images
The camera has not been in use for an extended period
of time (the battery was removed)
Time settings are incorrect
Setting was ignored
The memory card was removed while the readiness
indicator was flashing
The memory card formatting is faulty or the card is
damaged
playback medium
The camera is connected to the Leica FOTOS app
Light sensor was covered while picture was taken
Long exposure times (>1 s)
ISO sensitivity set too high
White balance not or incorrectly set
Flash photography in very dark environment: Reflection
of dust particles
Lens is dirty
Lens is obstructed
Camera moved during exposure
Macro Function
Adjust the display options
Remove write protection (using the device with which
the file was originally set to write protected)
Insert a charged battery and configure the correct
settings
Set the time correctly
Caution: Time settings will be lost if the camera is not
used/remains in storage with a depleted battery over
an extended period of time
Cannot be removed in retrospect
Deactivate the function as needed
Never remove the memory card while the readiness
indicator is flashing. Charge the battery.
Reformat the memory card
(Caution: Loss of data!)
Set the correct aspect ratio on the camera
Terminate the connection
Make sure that the light sensor is not obstructed
Activate the noise suppression function for long
exposure times
Decrease ISO sensitivity
Adjust white balance to light source or adjust manually
Deactivate the flash
Clean the lens
Make sure that lens is unobstructed
Use flash or mount camera on a tripod
Select the appropriate mode