Aspect Ratio; Image Stabilization; Setting The Stabilization Direction - Leica SL2 Instruction Manual

ASPECT RATIO

EN
You have a choice of aspect ratios to select in addition to the basic
3:2 (e.g. 1:1). The relevant cropped section will be displayed.
Recordings made in JPG format are saved with the relevant aspect
ratio. DNG recordings will always have the natural sensor format
(3:2), the set aspect ratio is only in aid of the image composition.
In review mode, DNG recordings will be displayed with horizontal or
vertical auxiliary lines showing the cropped section seen when
recording.
Factory setting:
3:2 3:2
▸ Select
Photo Aspect Ratio Photo Aspect Ratio
▸ Select the desired setting
( , , , ,
3:2 3:2 7:5 7:5 4:3 4:3 1:1 1:1 3:1 3:1
92
in the main menu
, )
16:9 16:9

IMAGE STABILIZATION

The less favorable the lighting conditions during recording, the
slower will be the required shutter speeds for correct exposure.
Visual image stabilization is a great tool for preventing out-of-focus
images due to blurring.
Factory setting:
On On
▸ Select in the main menu
Image Stabilization Image Stabilization
▸ Select /
On On Off Off

SETTING THE STABILIZATION DIRECTION

For camera pans it can be useful to only correct camera shake in
specific directions.
Factory setting:
Normal Normal
Normal Camera shake in all directions (horizontal,
vertical, rotational) will be corrected
automatically.
Automatic The camera recognizes the panning direction
automatically and corrects orthogonal
camera shake autonomously.
Vertical panning Only horizontal camera shake will be
corrected.
Horizontal Only vertical camera shake will be corrected.
panning
▸ Select in the main menu
Panning Mode Panning Mode
▸ Select the desired setting
( , ,
Normal Normal Auto Panning Auto Panning Vertical Panning Vertical Panning
, )
Horizontal Panning Horizontal Panning